View Latest Blog Entries
Close
Categories
Testing & Assessment Certification Standard & Regulation Aging Wires & Systems Maintenance & Sustainment Protection & Prevention Management Conference & Report Research Miscellaneous Arcing
Popular Tags
Visual Inspection High Voltage AS50881 MIL-HDBK MIL-HDBK-525 FAR Electromagnetic Interference (EMI) AS4373 Maintenance FAR 25.1707 Wire System Circuit Protection
All Tags in Alphabetical Order
2021 25.1701 25.1703 abrasion AC 33.4-3 AC 43 Accelerated Aging accessibility ADMT Aging Systems AIR6808 AIR7502 Aircraft Power System aircraft safety Aircraft Service Life Extension Program (SLEP) altitude Aluminum arc damage Arc Damage Modeling Tool Arc Fault (AF) Arc Fault Circuit Breaker (AFCB) Arc Resistance Arc Track Resistance Arcing Arcing Damage AS22759 AS22759/87 AS23053 AS29606 AS4373 AS4373 Method 704 AS50881 AS5692 AS6019 AS6324 AS81824 AS83519 AS85049 AS85485 AS85485 Wire Standard ASTM B230 ASTM B355 ASTM B470 ASTM D150 ASTM D2671 ASTM D495 ASTM D8355 ASTM D876 ASTM F2639 ASTM F2696 ASTM F2799 ASTM F3230 ASTM F3309 ATSRAC Attenuation Automated Wire Testing System (AWTS) Automotive Avionics backshell batteries bend radius Bent Pin Analysis Best of Lectromec Best Practice bonding Cable Cable Bend cable testing Carbon Nanotube (CNT) Certification cfr 25.1717 Chafing Chemical Testing Circuit Breaker circuit design Circuit Protection cleaning clearance Coaxial cable cold bend collision comparative analysis Compliance Component Selection Condition Based Maintenance Conductor Conductor Testing conductors conduit Connector connector installation Connector rating connector selection connector testing connectors contacts Corona Corrosion Corrosion Preventing Compound (CPC) corrosion prevention Cracking creepage D-sub data analysis data cables degradat Degradation Delamination Derating design safety development diagnostic Dielectric breakdown dielectric constant Dimensional Life disinfectant Distributed Power System DO-160 dry arc dynamic cut through E-CFR electric aircraft Electrical Aircraft Electrical Component Electrical Power Electrical Testing Electrified Vehicles Electromagnetic Interference (EMI) Electromagnetic Vulnerability (EMV) Electrostatic Discharge EMC EMF EMI EN2235 EN3197 EN3475 EN6059 End of Service Life End of Year Energy Storage engines Environmental Environmental Cycling environmental stress ethernet eVTOL EWIS certification EWIS Component EWIS Design EWIS Failure EWIS sustainment EWIS Thermal Management EZAP FAA FAA AC 25.27 FAA AC 25.981-1C FAA Meeting failure conditions Failure Database Failure Modes and Effects Analysis (FMEA) FAQs FAR FAR 25.1703 FAR 25.1707 FAR 25.1709 Fault fault tree Filter Line Cable Fixturing Flammability fleet reliability Flex Testing fluid exposure Fluid Immersion Forced Hydrolysis fuel system fuel tank ignition Functional Hazard Assessment functional testing Fundamental Articles Fuse Future Tech galvanic corrosion Glycol Gold Gold plating Green Taxiing Grounding hand sanitizer handbook Harness Design harness protection hazard Hazard Analysis health monitoring heat shrink heat shrink tubing high current high Frequency high speed data cable High Voltage High Voltage Degradation HIRF History Hot Stamping Humidity Variation HV connector HV system ICAs IEC 60851 IEC60172 IEEE immersion insertion loss Inspection installation installation safety Instructions for Continued Airworthiness insulating material insulating tape Insulation insulation breakdown insulation resistance insulation testing interchangeability IPC-D-620 ISO 17025 Certified Lab ISO 9000 J1673 Kapton Laser Marking life limit life limited parts Life prediction life projection Lightning lightning protection liquid nitrogen lithium battery lunar Magnet wire maintainability Maintenance Maintenance costs Mandrel mean free path measurement mechanical stress Mechanical Testing MECSIP MIL-C-38999 MIL-C-85485 MIL-DTL-17 MIL-DTL-23053E MIL-DTL-3885G MIL-DTL-38999 MIL-E-25499 MIL-F-5372 MIL-HDBK MIL-HDBK-1646 MIL-HDBK-217 MIL-HDBK-454 MIL-HDBK-516 MIL-HDBK-522 MIL-HDBK-525 MIL-HDBK-683 MIL-STD-1353 MIL-STD-1560 MIL-STD-1798 MIL-STD-464 MIL-T-7928 MIL-T-7928/5 MIL-T-81490 MIL-W-22759/87 MIL-W-5088 MIL–STD–5088 Military 5088 modeling moon MS3320 NASA NEMA27500 Nickel nickel plating No Fault Found OEM off gassing Outgassing Over current Overheating of Wire Harness Parallel Arcing part selection Partial Discharge partial discharge at altitude Performance physical hazard assessment Physical Testing polyamide polyimdie Polyimide-PTFE Power over Ethernet power system Power systems predictive maintenance Presentation Preventative Maintenance Program Probability of Failure Product Quality PTFE pull through Radiation Red Plague Corrosion Reduction of Hazardous Substances (RoHS) regulations relays Reliability Research Resistance Revision C Rewiring Project Risk Assessment S&T Meeting SAE SAE Committee Sanitizing Fluids Scrape Abrasion Secondary Harness Protection separation separation distance Separation Requirements Series Arcing Service Life Extension Severe Wind and Moisture-Prone (SWAMP) Severity of Failure shelf life Shield Shielding Shrinkage signal signal cable Silver silver plated wire silver-plating skin depth skin effect Small aircraft smoke Solid State Circuit Breaker Space Certified Wires Splice standards Storage stored energy superconductor supportability Sustainment System Voltage Temperature Rating Temperature Variation Test methods Test Pricing Testing testing standard Thermal Circuit Breaker Thermal Endurance Thermal Index Thermal Runaway Thermal Shock Thermal Testing tin Tin plated conductors tin plating tin solder tin whiskering tin whiskers top 5 Transient Troubleshooting TWA800 UAVs UL94 USAF validation verification video Visual Inspection voltage voltage differential Voltage Tolerance volume resistivity vw-1 wet arc white paper whitelisting Winding wire Wire Ampacity Wire Bend Wire Certification Wire Comparison wire damage wire failure wire performance wire properties Wire System wire testing Wire Verification wiring components work unit code

Testing the Performance of AFCBs

Michael Traskos Certification Testing & Assessment

Key Takeaways
  • Arc Fault Circuit Breakers (AFCBs) can be used to mitigated arcing hazardards.
  • AS6019 provides the means of assessment.
  • The guillotine test method is a quick and effective means of evaluating AFCB response times.

Arc Fault Circuit Protection has been a technology that dates back to the 1990s. Despite this not being a new technology, the breath of its implementation is still limited. The device owes its inception to arcing events that occurred on in-service aircraft. Because of these events, the wiring community sought to create wiring that was arc track resistant, and the circuit protection community sought to cut off the arcing event before too much energy was released. This has been captured in the requirements of AS5692 for AC circuit protection, and AS6019 for DC protection.

Within the requirements of AS6019, is the requirement to evaluate a circuit breaker’s ability to detect and trip (open the circuit) in the case of an arcing event. Here, we review the test, what it protects, and what the results mean to those that use these protection devices.

The Setup

The arc fault circuit breaker identified in AS6019 contains a section that talks about dry arc track testing (Section 4.7.7.6.1). The setup for the test is rather rudimentary when it comes to electrical arcing (see discussions of other arcing events here). Many of the other test configurations associated with power systems and wiring require more setup and components; the AS6019 dry arc test does not.

AS6019
The guillotine test is a quick test for evaluating circuit breaker performance. This is an example circuit diagram for the test.

Here a fixed 28VDC power source is connected to the Device Under Test (DUT) with the specified limiting resistance between the DUT and induced fault location. In this manner, the system electrically represents what one would see in an aircraft installation with a limited resistance between the DUT and power source. The test sample is then connected to the incoming power side of the circuit and the guillotine blade is electrically grounded. The resistance between the guillotine blade and the DC source is also limited.

The power is applied to the system and the blade is brought down through the target wire. How the circuit protection responds to the arcing event is what this test seeks to determine.

Cutting Through

The guillotine test is one of the most basic tests of arcing. A razor blade is brought down onto a powered wire/wire harness, and the subsequent damage is evaluated. While few surfaces on an aircraft are as sharp as a razor blade, the reason for its use is that it is an easily acquirable and disposable part that produces a reasonably consistent arcing event. The thin blade is ideal because it is quickly destroyed limiting the duration of any electrical shorting event.

What are some of the results of the test?

There are only three possible outcomes from the test:

  1. An electrical arcing event occurs and the circuit breaker trips within the specified time. In the standard, this is within 100ms. This is the passing condition for the test.
  2. An electrical arcing event occurs, and the circuit breaker does not trip within the specified time. The circuit breaker has failed to properly respond and is considered to have failed.
  3. No arcing event occurs, or the event is too short. Repeat the test.

So why is this included in the standard?

This is included in the standard for an obvious reason: to test an arc fault circuit breaker, it is necessary to evaluate its performance in an arcing event. There is also the wet arc assessment method that is included in the test standard; this will be reviewed in another article.

AS6019
The blade is brought down onto a powered wire. Once contact is made between the conductor and blade, an arc occurs. The duration is dependent on the AFCB performance.

Looking to the Application

While these performance characteristics are specifically called out for an AFCB, the same performance level can and should be expected for any solid-state power controller used on modern aircraft. The latest standard from the SAE power controller committee, AS4805, incorporates some elements of this technique.

Clearly the issue that always comes up with arc fault protection is the issue of nuisance trips, and it is a legitimate concern. The reliability of any system is usually limited by its most unreliable component and constant nuisance trips do not help anyone. Certainly, in the last decade, engineers working on these devices have learned the best way to protect a circuit without causing undo activation. The impact of nuisance trips was covered in a previous article.

In Review

The arc performance requirements of the AS6019 circuit protection do a great job of defining the protection that should be expected from the next generation of circuit protection. The means for testing the arcing event response of the circuit protection, while impractical from a physical configuration, create a realistic arcing event electrical signature.

Testing of equipment like this requires a fair bit of specialized equipment. Those looking to evaluate the performance of their protection technologies by a third-party lab should contact Lectromec. We look forward to supporting your project certification needs.

Michael Traskos

Michael Traskos

President, Lectromec

Michael has been involved in wire degradation and failure assessments for more than a decade. He has worked on dozens of projects assessing the reliability and qualification of EWIS components. Michael is an FAA DER with a delegated authority covering EWIS certification and the chairman of the SAE AE-8A EWIS installation committee.