ASTM F3309- A Simplified Safety Analysis for Small Aircraft

March 10, 2021 Laura Wishart

Aircraft safety requirements vary depending on the size of the aircraft. Typically, larger aircraft have stricter requirements as a catastrophic failure in large aircraft has the potential for a much larger loss of life than that of small aircraft which hold far fewer passengers. The ASTM F3309 provides a simplified qualitative approach to evaluate the safety of small aircraft. Read more

EN2235 Review and Comparison to NEMA 27500

February 4, 2021 Laura Wishart

Cables are complicated engineered products. They range from the simple twisted pair (simple but requiring precise twists per foot) to the complicated signal and data cables used in many applications. Just as the NEMA 27500 cable standard is the go-to cable for many aerospace applications in the US, the EN2235 shares the same status in the EU. The requirements for these cables are outlined in this article. Further, we examine the differences between the EN2235 cables and the NEMA 27500 cables. Read more

EWIS and Aircraft Maintainability

January 19, 2021 Laura Wishart

The maintainability of the electrical wiring interconnection system (EWIS) is integral to the longevity of an aircraft. EWIS maintainability affects not only the EWIS itself, but any nearby system whose maintenance access is restricted by the location or function of the EWIS. Thus, high maintainability of the EWIS allows for faster, more efficient, and more precise maintenance of surrounding equipment and systems.

Original aircraft design must comply with EWIS regulations in the development stage to ensure long-term maintainability. It is important to know which regulations apply and which standards to follow when designing an aircraft to determine the appropriate maintenance requirements.

Here we will explore the requirements of some of the more common standards for EWIS maintainability in aircraft design.

The Impact of a Short Circuit on Conductor Performance

March 17, 2020 Laura Wishart

Over-current and shorting are an ever-present risk to power wires and cables. The hope is that circuit protection can quickly respond to over-current conditions fast enough to prevent any damage to the circuit components. Wire conductors have a temperature rating, limited by the plating, because that is the established temperature for long-term reliability. But what happens when a single wire is exposed to repeat over-current conditions? Does the latest generation of circuit protection sufficiently protect the wiring? Read more

By: Laura Wishart