Wire & Cable Smoke Resistance
FOR: Wire FOR: Cable $880–$1,550Available wire & cable smoke resistance methods for standards including AS4373, AS81044, AS85485 and others and samples such as Cable, Wire.
The smoke resistance test places a high current through the wire/cable to determines if the insulation/jacket will produce smoke. The current is increase on the specimen until the conductor temperature reaches the rated insulation temperature.
This test can be adjusted to examine the impact of wires/cables or secondary protection in the same harness. This of particular use for installed applications.
The following are some parameters that can be adjusted:
- Target temperature
- Test duration
- Enclosure temperature
- Other wires/cables in harness or secondary harness protection
Choose the exact method
Pricing and sample requirements vary by test method. Specific test requirements can be added on the request quote page. Final scope and pricing are confirmed by Lectromec usually within 24 hours.
Smoke Resistance (Current to Smoke)
AS4373 · 513
- Sample type
- Cable
- Specimens per test
- 1
- Length per test
- 180 in
Smoke Resistance
AS81044 · 4.7.5.24
- Sample type
- Wire
- Specimens per test
- 1
- Length per test
- 180 in
Smoke
AS85485 · 5.23
- Sample type
- Cable
- Specimens per test
- 1
- Length per test
- 225 in
Smoke
MIL-STD-2223 · 4008
- Sample type
- Wire
- Specimens per test
- 1
- Length per test
- 150 in
Catalog data generated from Lectromec's controlled Box workbook, version
2655261484000. Internal costing and supplier identities
are not published.